Auxiliaries

WA 126

cleaner for industrial use

 

Description

WA 126 is a non-toxic, low-volatility and non-flammable replacement of methylene chloride, used for flushing of mixing head of low-pressure pouring machines for polyurethane.

Removes some kinds of stains (polyeter resin or epoxy resin).

Can be applied to remove paints.

 

 

Physical and chemical characteristics (typical values)

Physical appearance                         transparent

Odour                                         characteristic

pH                                                       6,5 ÷ 7

Viscosity at 20°C                               2,6 mPa.s

Density at 20°C                                  1,09 kg / dm3

Boiling point (760 mmHg)                  ok. 200 °C

Flash point                                             > 100° C

Water solubility                                     max 20 ppm

 

Additional information

 

The use of flushing agent for mixing head of low-pressure pouring machine for polyurethane requires the use of gaskets made of TEFLON, NEOPRENE or EPDM in the flushing circuit.

 

Gaskets made of the VITON A, VITON B, natural rubber are not resistant enought.  

Packaging:

canister - 25 kg

pallet container (IBC) - 1000 kg

 

 

CLEANER 131

Solvent mixture.

 

Description

Recommended for fast cleaning in ambient temperatures.

Removes cured polyurethane and residues of release agents from moulds and tools (e.g. parts of mixing head).

Safe for metal components. In case of resin components do not leave for more than 10 min.

Physical and chemical characteristics (typical values)

Physical appearance                                 transparent liquid

Density at 20°C                                            0,9 - 1 kg / dm3

Boiling point                                                 200 °C

 

Packaging:

 

Metal kegs: 25 kg

THIXON 422 solvent-based adhesive

 

Description

THIXON 422 is an mono-component adhesive (primer) applied in processing of castable polyurethane or thermoplastic polyurethane elastomers that enhances the adhesion of polyurethane to metal or thermoplastic materials like polyamide or polyester.

 

Properties

THIXON 422 features high temperature and hydrolysis resistance. Does not contain heavy metals.

  

Typical parameters

	Units	Value	Method
Dry weight	% wag	16-18	ASTM D 5155
Viscosity at 25°C	mPa.s	165-365	ASTM D 4889
Spindle RV 2 RPM 30
Density	g/cm3	0,88	ASTM D 4889

 

Packaging:

24 kg metal pail

1 kg plastic pail, 4 kg metal pail

Phthalate-free pigment pastes

ICOPOR ECO B series

A pigment suspension in a phthalate-free plasticizer to be added in quantities of up to 1% wt. relative to the total weight of the polyurethane system components.

The paste may be mixed with a polyol component or may be fed through a separate line to the mixing head (no thinning is necessary).

The paste is not reactive. It does not affect the stoichiometry.

Packaging: 

25 kg metal pail

1 kg plastic pail, 5 kg metal pail, 10 kg metal pail

 

 

Primary colors	Indicative reference to RAL	Notes
I ECO BIANCO 600/B	RAL 9010	mineral pigment
I ECO GIALLO 611/B	RAL 1006	mineral pigment
I ECO GIALLO 622/B	RAL 1003	organic pigment
I ECO GIALLO 628/B	RAL 1018	organic pigment
I ECO ARANCIO 602/B	RAL 2004	organic pigment
I ECO ROSSO 630/B	RAL 3000	organic pigment
I ECO ROSSO 657/B	RAL 3009	mineral pigment
I ECO ROSSO 661/B	RAL 3020	organic pigment
I ECO BRUNO 610/B	RAL 8007	mineral pigment
I ECO VERDE 604/B	RAL 6016	organic pigment
I ECO BLU 632/B	RAL 5002	organic pigment
I ECO NERO 665/B	RAL 9011	organic pigment
I ECO VIOLA 699/B	none (violet)	organic pigment

• Formulated colors

pastes are made upon request, according to the RAL catalogue or provided specification

SUPER RELEASE S

Polymer mixture characterised by excellent slide and release properties, with a solvent-based carrier.

Intended use: mould release agent, especially hard-to-reach areas

Semi-permanent release agent used for moulded polyurethane elastomer products and many types of rubber mixtures, as: VITON – EPDM – SBR – NR – NBR – VMQ – BIIR – CR – AU – EU – BR – IR – IIR. 

Does not contain matting agents.

Packaging:

aerosol 500ml (12 pieces carton box)

 

CPD HD 80 F

Silicone-basedrelease agent of high concentration.

Application modality: spray, paintbrush or cloth

Intended use: mould release agent

High-performance, non-toxic, anti-adhesion agent applicable with cloth, painbrush or spray (spray kit included in our offer). Does not leave residues and “rings” on the mould. Suitable for moulds with easy-to-reach surfaces. For hard-to-reach areas we recommend to thin the product, for example with white spirit or release agent of low concentration INT 2440B.

Packaging: 23 kg metal keg

 

CPD 98 DO 22

Silicone based release agent of medium concentration in isoalkane carrier.

Application modality: spray, paintbrush or cloth.

Intended use: mould release agent
Release agent of medium concentration for application by cloth, paintbrush, or spray (spray kit included in our offer). Does not leave residues or “rings” on mould surface. Performs excellently on moulds. Can be modified with silicone based release agents of higher or lower concentration (CPD HD 80 F or INT 2440 B). The product does not contain matting agents.

Packaging: 20 kg metal keg

 

INT 2440 B

Silicone based release agent of low concentration in isoalkane carrier.

Application modality: spray, paintbrush or cloth

Intended use: mould release agent, including hard-to-reach areas

Release agent of low concentration for application by cloth, paintbrush, or spray (spray kit included in our offer). Does not leave residues or “rings” on mould surface. Performs excellently on moulds with hard-to-reach areas. Can be modified with silicone based release agents of higher-concentration (CPD 98 DO 22 or CPD HD 80 F). The product does not contain matting agents.

Packaging: 18 kg metal keg